Finish trade work before detailed cleaning
Post-construction cleaning works best after sanding, drilling, painting, carpentry and major installations are complete. If contractors are still cutting or drilling, newly cleaned surfaces can collect dust again.
Ask contractors to remove large debris and construction waste first. A cleaning crew should not be expected to handle hazardous waste, sharp rubble or specialist remediation unless specifically qualified and contracted for it.
Fine dust needs a controlled sequence
Fine dust settles on high surfaces, ledges, window tracks, cabinet fronts, fixtures and floors. Cleaning generally moves from higher accessible surfaces toward the floor, with appropriate vacuum filtration and damp wiping where the material allows.
Do not use dry sweeping alone for fine dust when it simply pushes particles back into the air. Follow equipment and material guidance, and use suitable respiratory and eye protection for the work conditions.
Protect new finishes
New stone, timber, glass coatings, painted walls and hardware may be more vulnerable than ordinary household surfaces. Share product or manufacturer care instructions and identify recently installed finishes.
Adhesive, grout haze, paint splashes and cement residue may require specialist products. Test first and avoid blades or abrasive pads on unknown surfaces. Some marks may need the trade installer rather than a cleaner.
Plan the handover checklist
List rooms, windows, built-ins, kitchen interiors, washrooms, balcony areas and any excluded construction zones. Confirm water and electricity availability, lift access, parking and whether the property is vacant.
Mahir can review post-renovation cleaning requests in Lahore. Photos and a site review help determine the correct scope and whether specialist residue removal is needed.
Need help with the actual clean?
Share your area, property type and the surfaces that need attention. Mahir can review the scope and confirm availability.
Ask for a Lahore quote